Inglés, pregunta formulada por Usuario anónimo, hace 4 meses

2- Lea el texto y responda. Recuerde: consigna en español, respuesta en español.
Since we live in a three dimensional world, it is necessary to control the attitude or orientation of a flying aircraft in all three dimensions. In flight, any aircraft will rotate about its center of gravity, a point which is the average location of the mass of the aircraft. We can define a three dimensional coordinate system through the center of gravity with each axis of this coordinate system perpendicular to the other two axes. We can then define the orientation of the aircraft by the amount of rotation of the parts of the aircraft along these principal axes.
The yaw axis is defined to be perpendicular to the plane of the wings with its origin at the center of gravity and directed towards the bottom of the aircraft. A yaw motion is a movement of the nose of the aircraft from side to side. The pitch axis is perpendicular to the yaw axis and is parallel to the plane of the wings with its origin at the center of gravity and directed towards the right wing tip. A pitch motion is an up or down movement of the nose of the aircraft. The roll axis is perpendicular to the other two axes with its origin at the center of gravity, and is directed towards the nose of the aircraft. A rolling motion is an up and down movement of the wing tips of the aircraft.
In flight, the control surfaces of an aircraft produce aerodynamic forces. These forces are applied at the center of pressure of the control surfaces which are some distance from the aircraft cg and produce torques (or moments) about the principal axes. The torque causes the aircraft to rotate. The elevators produce a pitching moment, the rudder produces a yawing moment, and the ailerons produce a rolling moment. The ability to vary the amount of the force and the moment allows the pilot to maneuver or to trim the aircraft. The first aircraft to demonstrate active control about all three axes was the Wright brothers' 1902 glider.


Actividad:

1. ¿De qué crees que habla el texto? ¿Cómo lo notaste?
2. ¿Qué palabras transparentes encuentras?
3. ¿Qué otras herramientas te ayudan a comprender el idioma?
4. ¿En los textos técnicos cual crees que es la herramienta más usada?
5. ¿Qué tiempo verbal es predominante en los textos técnicos? ¿Cuál sería la traducción del mismo al español? Cita del texto al menos dos ejemplos del mismo.
6. ¿Qué conectores encuentras en el texto?
7. Traduce

Respuestas a la pregunta

Contestado por orfelinadiaz134
0

Respuesta:

fjdjjfhdhshjjdjejbjdjejfjdurbrjejjrktkrkurbru

Explicación:

kdkrjtjtitjntirirnrn4nriik4k4i

ktktnurhjeipw0991q1eszfoxjxjjxhvyfyf5e4rjfoeiwjekenjrkrkelelelwnskgllenenemejejfnjfndndndkdd⁉️⁉️‍♂️kfkgngngngg9lt9ñtoglolthyvggvhbhbb

Otras preguntas